Circular For Admission to Post B.Sc. Four Semester P.G. Diploma in Jute Technology and Management Calcutta University |
Circular For Admission to
Post B.Sc. Four Semester P.G. Diploma in Jute Technology and Management
Calcutta University
Revised date of form fill–up & Common Admission Test for admission to Post B.Sc. 2 yrs PG Diploma in Jute Technology and Management (PGDJTM) Course under Department of Jute and Fiber Technology, University of Calcutta – 2015–16
All B.Sc. Passed / Appeared candidates with Physics / Chemistry / Mathematics / Statistics / Computer Science as one of the subject combination, may note the revised date of form fill – up and Common Admission Test to PGDJTM course.
Last Date of Application : 27th August 2015, with fee of Rs. 500/- in cash
(For SC/ST/OBC/PH candidates : Application Fee – Rs. 250/-);
Admission Test : Friday, 28th August 2015, at 12:00 Noon at this department.
Admission Date : 1st to 4th September 2015.
Commencement of Class : 7th September 2015.
No. of Seats : 40 – 60 (50% sponsored and 50% non – sponsored seas with reservations as per CU norms.
All other conditions remain unchanged. Those who have already applied, need not apply again.
All candidates have to submit application in prescribed form available from office of the Department or website www.caluniv.ac.in or www.ijtindia.org .
»Click here for Application Form.
Circular For Admission to
Post B.Sc. Four Semester P.G. Diploma in Jute Technology and Management
DJFT- PGDJTM - Advt. No-1/2015
Department of Jute and Fibre Technology, Institute of Jute Technology, Calcutta University, announces admission notification to the Post B.Sc. Four Semester PG Diploma in Jute Technology and Management course for sustainable HRD for Jute Sector to be conducted in this department for Sponsored and General (Non-sponsored) Candidates (with required reservations for SC/ST/OBC/PH candidates).
-
About the Course :
This Post B.Sc. Four Semester PG Diploma in Jute Technology and Management is approved by Calcutta University and is mainly designed to suit the Diploma level technical manpower requirement as Technical supervisors for Jute industry and related organizations to fill-up the gap of future ‘Technical Managers’ for the Jute sector. -
Intake :
Total Seats : 60 (50% for sponsored and 50% for non-sponsored candidates.). However, if seats for sponsored candidates remain vacant, those will be filled up by non-sponsored candidates. Reservations for SC/ST/OBC/PH candidates are as per University norms / W.B. Govt. rule. 5% extra seats are reserved for Tuition fee waiver (TFW) candidate. 15% supernumerary (extra) seats for PIO/Foreign nationals. -
Eligibility for Admission :
Pass in three years B. Sc. Examination or equivalent with Physics / Chemistry / Mathematics /Statistics / Computer, etc. as part of the subject combination recognized by the University of Calcutta / UGC. B.Sc appeared candidates may also apply and their admission will be valid subject to passing the B.Sc with qualifying marks. -
Admission Procedure :
A Common Admission Test for PGDJTM for all categories of candidates will be conducted by this Department. The admission test will comprise one paper of 100 marks with four subgroups, viz.- General knowledge and English, 25 marks
- General Mathematical / Statistical aptitude, 25 marks
- Physics / Computer Application, 25 marks and
- Chemistry, 25 marks.
For this session 2015-16, the admission test will be held on Friday, 28th August 2015, at 12:00 Noon at the premises of Department of Jute and Fibre Technology , Institute of Jute Technology, Calcutta University (35, Ballygunge Circular Road, Kolkata - 700 019.) followed by interview on the same day. All candidates applied for the said course are to appear for the Admission Test. No separate „Admit Card‟ will be issued, the "Application Fee" receipt is the identity card for each candidate.
- Application Fee and Course Fee: For both sponsored and non-sponsored candidates: Application fee during submission of the application is Rs. 500/- only. (Rs. 250/- for SC/ST/OBC/PH candidates, subject to producing valid supporting document). The course fee for the 1st semester is Rs. 5,430/- (including lab fee, library fee etc for each semester) plus miscellaneous other fees as applicable for all categories of candidates (Students activities fee – Rs. 400/- in 1st semester only; Identity card fee – Rs. 30/- in 1st semester only) for all subsequent semester the fee is Rs. 5000/- per semester. Examination fee of the course is as applicable and to be paid separately as decided by the University of Calcutta from time to time.
-
Sponsorship :
Jute Mill/Jute Organization or any other reputed organization / Educational Body / Govt. Dept. may sponsor candidates for the Post B.Sc. Four Semester PG Diploma in Jute Technology and Management course. For the sponsored candidates, original letter of sponsorship from the Unit Head of the Sponsoring Organization/Unit/Mill (Director/ President/General Manager/Mill Manager/ Chief Executive/Executive Director with full name and office seal) mentioning the total experience, if any, is to be produced to this office during submission of application form. However all sponsored candidates have to qualify the Common Admission Test for admission to this course. -
Important Dates for Admission :
Last Date of Submission of Application : 27th August 2015, with fee Rs. 500/- in cash
(For SC/ST/OBC/PH candidates: application fee – Rs. 250/-);
Admission Test : Friday, 28th August 2015, at 12:00 Noon at DJFT – IJT – CU campus at 35, Ballygunge Circular Road, Kolkata - 700 019.
Admission Date : 1st–4th September, 2015.
Commencement of the Class for this semester : 7th September 2015. -
Application Form :
All candidates have to submit application in prescribed form available from office of the Department or website www.caluniv.ac.in or www.ijtindia.org available from 1st June, 2015. -
Documents required during Admission :
- B.Sc. Pass Certificate / Provisional certificate and/or Marksheet.
- Higher Secondary or equivalent certificate / marksheet.
- Madhyamik or equivalent Certificate as proof of age.
- Medical Certificate for medical fitness, from any Registered Doctor.
- Relevant Certificate for SC/ST /OBC/PH candidate.
- Transfer Certificate,/ no objection certificate /proof of admission cancellation, if already admitted to other College.
- If Sponsored, original letter of sponsorship in prescribed format and No objection from present employer, if the candidate is presently employed anywhere.
- The course fee in full (Rs. 5530/-) for the first semester of this PGDJTM course, to be paid by cash or demand draft in favour of "University of Calcutta" payable at Kolkata.
-
Contact Persons (HOD and Course Coordinators) :
-
Prof. (Dr.) A. K. Samanta, Head of the Department
(Mobile No. : +91 98311 61529; e-mail : ijtaksamanta@hotmail.com) -
Dr. Swapan Kumar Ghosh, Course Coordinator
(Mobile No. : +91 98313 24354; e-mail : ijtskg40@gmail.com) -
Dr. Asis Mukhopadhyay, Course Coordinator
(Mobile No. : +91 94338 82282; e-mail : drasismukhopadhyay@gmail.com)
-
Prof. (Dr.) A. K. Samanta, Head of the Department
Course curriculum with Schedule of Papers for
Post B.Sc. 4 Semester Post Graduate Diploma Course in Jute Technology and Management,
approved by the University of Calcutta
1st Semester | |||||||||
Paper Code | Paper Title | Marks | No of Period/Week | Credits Assigned | |||||
SA | ESE | Total | L | T | P | ||||
Theoretical Papers | |||||||||
Paper-1 | DJT-101 | Engg. Mathematics and Statistics | 30 | 70 | 100 | 2 | 1 | 0 | 3 |
Paper-2 | DJT -102 | Mechanical Engineering-I | 30 | 70 | 100 | 3 | 0 | 0 | 3 |
Paper-3 | DJT -103 | Electrical and Electronics Engg.-I | 30 | 70 | 100 | 3 | 0 | 0 | 3 |
Paper-4 | DJT -104 | Economics, Accountancy and Costing | 30 | 70 | 100 | 2 | 1 | 0 | 3 |
Paper-5 | DJT -105 | Jute & Other Textile Fibres | 30 | 70 | 100 | 2 | 1 | 0 | 3 |
Paper-6 | DJT -106 | Communication Skill | 30 | 70 | 100 | 2 | 1 | 0 | 3 |
Subtotal (Theoretical) |
180 | 420 | 600 | 14 | 4 | 0 | 18 | ||
Practical Papers | |||||||||
Paper-1 | DJT-151 | Mech. Eng. Workshop Practice | 30 | 70 | 100 | 0 | 0 | 3 | 2 |
Paper-2 | DJT-152 | Electrical Eng. Practical | 30 | 70 | 100 | 0 | 0 | 3 | 2 |
Paper-3 | DJT-153 | Eng. Drawing – I Practical | 30 | 70 | 100 | 0 | 0 | 3 | 2 |
Paper-4 | DJT-154 | Fibre & Textile Chemistry Practical | 30 | 70 | 100 | 0 | 0 | 3 | 2 |
Subtotal (Practical) |
120 | 280 | 400 | 0 | 0 | 12 | 8 | ||
Total (1st Semester) |
300 | 700 | 1000 | 14 | 4 | 12 | 26 |
2nd Semester | |||||||||
Paper Code | Paper Title | Marks | No of Hours/Week | Credits Assigned | |||||
SA | ESE | Total | L | T | P | ||||
Theoretical Papers | |||||||||
Paper-1 | DJT-201 | Mech. Engineering-II | 30 | 70 | 100 | 2 | 1 | 0 | 3 |
Paper-2 | DJT -202 | Electrical and Electronics Engg.-II | 30 | 70 | 100 | 3 | 0 | 0 | 3 |
Paper-3 | DJT -203 | Yarn Manufacture- I | 30 | 70 | 100 | 3 | 0 | 0 | 3 |
Paper-4 | DJT -204 | Fabric Manufacture-I | 30 | 70 | 100 | 2 | 1 | 0 | 3 |
Paper-5 | DJT -205 | Textile Science-I | 30 | 70 | 100 | 2 | 1 | 0 | 3 |
Paper-6 | DJT -206 | Management Principles & Human Resource Management | 30 | 70 | 100 | 2 | 1 | 0 | 3 |
Subtotal (Theoretical) |
180 | 420 | 600 | 14 | 4 | 0 | 18 | ||
Practical Papers | |||||||||
Paper-1 | DJT-251 | Yarn Manufacture-I Practical | 15 | 35 | 50 | 0 | 0 | 2 | 1 |
Paper-2 | DJT-252 | Fabric Manufacture-I Practical | 15 | 35 | 50 | 0 | 0 | 2 | 1 |
Paper-3 | DJT-253 | Textile Chemical Processing-I Practical | 15 | 35 | 50 | 0 | 0 | 2 | 1 |
Paper-4 | DJT-254 | Textile Testing-I Practical | 15 | 35 | 50 | 0 | 0 | 2 | 1 |
Paper-5 | DJT-255 | Mech. Engg. Workshop Practice | 15 | 35 | 50 | 0 | 0 | 2 | 1 |
Paper-6 | DJT-256 | Electrical Engg. Practical | 15 | 35 | 50 | 0 | 0 | 2 | 1 |
Paper-7 | DJT-257 | Engineering Drawing-II Practical | 30 | 70 | 100 | 0 | 0 | 3 | 2 |
Subtotal (Practical) |
120 | 280 | 400 | 0 | 0 | 12 | 8 | ||
Total (2nd Semester) |
300 | 700 | 1000 | 14 | 4 | 15 | 26 |
3rd Semester | |||||||||
Paper Code | Paper Title | Marks | No of Hours/Week | Credits Assigned | |||||
SA | ESE | Total | L | T | P | ||||
Theoretical Papers | |||||||||
Paper-1 | DJT-301 | Jute Yarn Manufacture-II | 30 | 70 | 100 | 2 | 1 | 0 | 3 |
Paper-2 | DJT -302 | Jute Fabric Manufacture-II | 30 | 70 | 100 | 3 | 0 | 0 | 3 |
Paper-3 | DJT -303 | Textile Science-II | 30 | 70 | 100 | 3 | 0 | 0 | 3 |
Paper-4 | DJT -304 | Fabric Structure & Diversified Jute Fabrics | 30 | 70 | 100 | 2 | 1 | 0 | 3 |
Paper-5 | DJT -305 | Computer Applications | 30 | 70 | 100 | 2 | 1 | 0 | 3 |
Paper-6 | DJT -306 | Financial Management and Marketing Management | 30 | 70 | 100 | 2 | 1 | 0 | 3 |
Subtotal (Theoretical) |
180 | 420 | 600 | 14 | 4 | 0 | 18 | ||
Practical Papers | |||||||||
Paper-1 | DJT-351 | Yarn Manufacture-II Practical | 30 | 70 | 100 | 0 | 0 | 3 | 2 |
Paper-2 | DJT-352 | Fabric Manufacture-II Practical | 30 | 70 | 100 | 0 | 0 | 3 | 2 |
Paper-3 | DJT-353 | Textile Chemical Processing-II Practical | 15 | 35 | 50 | 0 | 0 | 2 | 1 |
Paper-4 | DJT-354 | Textile Testing-II Practical | 15 | 35 | 50 | 0 | 0 | 2 | 1 |
Paper-5 | DJT-355 | Computer Applications Practical | 30 | 70 | 100 | 0 | 0 | 3 | 2 |
Subtotal (Practical) |
120 | 280 | 400 | 0 | 0 | 12 | 8 | ||
Total (2nd Semester) |
300 | 700 | 1000 | 14 | 4 | 12 | 26 |
4th Semester | |||||||||
Paper Code | Paper Title | Marks | No of Hours/Week | Credits Assigned | |||||
SA | ESE | Total | L | T | P | ||||
Theoretical Papers | |||||||||
Paper-1 | DJT-401 | Yarn Manufacture-III | 30 | 70 | 100 | 3 | 0 | 0 | 3 |
Paper-2 | DJT-402 | Fabric Manufacture-III | 30 | 70 | 100 | 3 | 0 | 0 | 3 |
Paper-3 | DJT-403 | Textile Sc.-III | 30 | 70 | 100 | 2 | 1 | 0 | 3 |
Paper-4 | DJT-404 | Production Management & Industrial Eng. | 30 | 70 | 100 | 2 | 1 | 0 | 3 |
Paper-5 | DJT-405 | Maintenance, Safety, and Energy Management | 30 | 70 | 100 | 2 | 1 | 0 | 3 |
Paper-6 | DJT-406 | Mill Planning, Process Control & Quality Management | 30 | 70 | 100 | 3 | 0 | 0 | 3 |
Subtotal (Theoretical) |
180 | 420 | 600 | 15 | 3 | 0 | 18 | ||
Practical Papers | |||||||||
Paper-1 | DJT-451 | Yarn Manufacture-III Practical | 15 | 35 | 50 | 0 | 0 | 2 | 1 |
Paper-2 | DJT-452 | Fabric Manufacture-III Practical | 15 | 35 | 50 | 0 | 0 | 2 | 1 |
Paper-3 | DJT-453 | Textile Chemical Processing-III Practical | 15 | 35 | 50 | 0 | 0 | 2 | 1 |
Paper-4 | DJT-454 | Textile Testing-III Practical | 15 | 35 | 50 | 0 | 0 | 2 | 1 |
Paper-5 | DJT-455 | Mill Training Report & Viva-voce Examination* | 30 | 70 | 100 | 0 | 0 | -- | 2 |
Paper-6 | DJT-456 | Project Work | 30 | 70 | 100 | 0 | 0 | -- | 2 |
Subtotal (Practical) |
120 | 280 | 400 | 0 | 3 | 8 | 8 | ||
Total (2nd Semester) |
300 | 700 | 1000 | 15 | 3 | 12 | 26 | ||
GRAND TOTAL CREDIT | 1200 | 2800 | 4000 | 104 |
• SA - Sessional Assesment; ESE - End Semester Examinations
• L - Lecture Hour; T - Tutorial Hour; P - Practical Hour
* Each candidate shall undertake Mill Training in jute mills for total 16 weeks in four semesters (4 weeks in each semester) which will be assessed at the end of Semester-IV.
»Click here for Application Form.
Source : caluniv.ac.in